{"id":1796,"date":"2023-05-10T13:40:12","date_gmt":"2023-05-10T13:40:12","guid":{"rendered":"https:\/\/visionatnight.com\/?p=1796"},"modified":"2023-12-26T02:17:49","modified_gmt":"2023-12-26T02:17:49","slug":"ak-with-eotech","status":"publish","type":"post","link":"https:\/\/visionatnight.com\/ak-with-eotech\/","title":{"rendered":"Maximizing Your AK’s Potential with EOTech"},"content":{"rendered":"\n
EOTech is one of the most prominent names that come up when holographic sights are mentioned. Although holographic sights are very durable, they aren\u2019t compatible with all types of firearms. <\/p>\n\n\n\n
So, what about AK with EOTech?<\/strong><\/p>\n\n\n\n EOTech holographic sights are compatible with most AK firearms. But the placement of it on the mounting rail is kind of problematic. It\u2019s because the sight sits too high and the barrel sit is too low. An adapter or mounting rail can solve this problem.<\/strong><\/p>\n\n\n\n That was the highlight of the main discussion. To learn more about this topic join us in the full discussion. Let\u2019s begin!<\/p>\n\n\n\n Yes, EoTech sights are compatible with AK rifles. In fact, the EOTech holographic sights were initially made for AKs. Just like how <\/strong>ATN, AGM, and, Pulsar<\/strong><\/a> is especially renowned for thermal imaging.<\/strong><\/p>\n\n\n But there are some issues that make people complain while combining an AK with EOTech. That is even with an ultra-low profile mounting, Eotechs appear to sit far too high on an AK. So, people complain about the difficulty of combining them with a proper cheek weld. <\/p>\n\n\n\n There are also complaints about the barrel sit being too low compared to EOTech. Basically, EOTech has a poor fit with AK, which makes a lot of people uninterested in pairing them up.<\/p>\n\n\n\n While mounting them, they sit too high above the rail. EOTech sights already of a higher axis. So, the fitting doesn\u2019t become too helpful for the users.<\/p>\n\n\n\n That\u2019s why, while fitting an EOTech sight with an AK you\u2019ll need a mounting rail or adapter. Picatinny rails are the best fit for EOTech optics as they are used for many other firearms including AK.<\/p>\n\n\n\n You can also use receiver-mounted rails or dust cover rails for your EOTech. These rails are simple to use and install. Also, the EOTech sight can be securely fitted with AK with them.<\/p>\n\n\n\n While on the topic, note that some of the EOTech sights are incompatible with AK-47. It\u2019s due to the differences in the receiver design, barrel profile, or rail system.<\/p>\n\n\n\n That\u2019s why before purchasing an EOTech for your AK, make sure you check the compatibility. It should be mentioned in the manufacturer\u2019s specification. <\/p>\n\n\n\n You can also consult a qualified gunsmith if you need further assistance. <\/p>\n\n\n\n To mount your EOTech on your AK rifle, you\u2019d be needing a few tools and components first. Such as-<\/p>\n\n\n\n Do you have them? Then let\u2019s get started! Follow these simple steps.<\/p>\n\n\n\n Since the existing mounting rear sight won\u2019t fit with the EOTech sight, you must remove it first. It also goes by the name dust cover. <\/p>\n\n\n\n There are some retaining screws or pins that hold it together with the firearm. There are 3 hex socket screws, 1 M3 nut, 1 rear rail, and 1 M3 screw. <\/p>\n\n\n\n Start with the hex socket screws. Use a hex head wrench to remove those screws and nuts to detach the dust cover.<\/p>\n\n\n\n Now it\u2019s time to install the new mounting rail or adapter. Installing it should be easy as it\u2019ll sit at the old dust cover\u2019s position. But it\u2019s better to look at the directions given by the user manual.<\/p>\n\n\n\n The manual has sections explaining the installation process of the adapter or mounting rail. For most of the AK models, the steps are somewhat similar.<\/p>\n\n\n\n These steps are-<\/strong><\/p>\n\n\n\n Position the EOTech sight on the mounting rail. Now, start attaching the mounting screws that are with the EOTech sight. Tighten the screws properly to ensure they are stable.<\/p>\n\n\n\nCan You Use EoTech With AK?<\/h2>\n\n\n\n
How To Mount EOTech On AK?<\/h2>\n\n\n\n
\n
Step-1: Remove The Existing Dust Cover<\/h3>\n\n\n\n
Step-2: Install The New Mounting Rail<\/h3>\n\n\n\n
\n
Step-3: Install The EOTech Sight<\/h3>\n\n\n\n
Step-4: Zero The Sight<\/h3>\n\n\n\n